Toto NEOREST SE Mode D'emploi page 27

Using the preference buttons (continued)
Changing or deleting the settings (continued)
Press one of the three configured (numeral display colors reversed) pref-
erence buttons (1~3) and begin operation.

In this example we press preference button 1.

Please operate with the On/Off button set to on.

This won't work unless there is water in the bathtub. Please have at least 13-3/8" (34 cm) of water in
the bathtub.

When the preference button does not display, please set all four of the lower buttons to off.
Operating the air blower, Hydro Hands / shoulder-warmer water or un-
derwater lighting at your preferred settings.
The three lower buttons are turned off when these settings are cancelled.

Operating the air blower ► See page 18.

Operating Hydro Hands / shoulder-warmer water ► See page 19.

Operating the underwater lighting ► See page 20.
When you have configured your preferred settings, press the Set button
and the settings will be complete.
ӿ When the settings have been configured, the display colors of the numeral on the preference
button will be reversed.

Settings are stored.
To end operation with the preference button, press the
for operation.
27
or