Buttons; Configuring The Settings - Toto NEOREST SE Mode D'emploi

This preference buttons can be set to your preferred operations (air blower, Hydro Hands / shoulder-
warmer water, underwater lighting). Up to three patterns can be set using the preference buttons.

Configuring the settings

Put water in the bathtub.
► See page 17.
With water in the bathtub, press one of the three preference buttons.

In this example we press preference button 1.

Please operate with the On/Off button set to on.

This won't work unless there is water in the bathtub. Please have at least 13-3/8" (34 cm) of water in
the bathtub.

When the preference button does not display, please set all four of the lower buttons to off.
Operating the air blower, Hydro Hands / shoulder-warmer water, or under-
water lighting at your preference settings.

Operating the air blower ► See page 18.

Operating Hydro Hands / shoulder-warmer water ► See page 19.

Operating the underwater lighting ► See page 20.
When you have configured your preferred settings, press the Set button
and the settings will be complete.
ӿ When the settings have been configured, the display colors of the numeral on the preference
button will be reversed.

Settings are stored.
25
Using the preference buttons