Applying The Cuff - Gima CONTEC08A Mode D'emploi

ENGLISH 70
Do not move during measurement, it will have a delayed effect on the patient's blood flow.
The device need to be placed for 2 hours from the minimum storage temperature to being ready for its intended use.
The device need to be placed for 4 hours from the highest storage temperature to being ready for its intended use.
Note
The following conditions may also cause changes in the blood pressure measurement value.
Take the measurement in one hour after meal or after drinking alcohol, coffee or after smoking, exercise, bathing.
Using incorrect posture such as standing or lying down, etc.
The patient speak or move his body during measurement.
When measuring, the patient is nervous, excited, emotional instability.
The room temperature rise or fall sharply, or the environment of measurement often changes.
Measuring in a moving vehicle.
The high and low location of cuff will cause changes in measurement results.
Continuous measurement for a long time.

10.2 Applying the Cuff

Both left and right arm can be measured.
Bare your arm or cloth close-fitting clothing during measurement.
Carry out the operation in a room with comfortable temperature.
When measuring, take the thick clothes off instead of rolling up the sleeves.
In order to measure accurately, pay attention to applying the cuff properly
(left arm).
1. Insert the arm cuff air plug in the cuff socket of sphygmomanometer.