EUROM Fireball 20T Manuel D'utilisation page 48

Unpacking
1. Take the heater out of the box.
2. Remove the protective material that has been used for transport.
3. Check the heater for any damage. If you discover any damage, contact your
dealer immediately.
Note: keep the box for future storage.
Assembly Fireball 20T
Place the handle on the upper cover,
with the screw holes lined up, and
secure the handle by turning the screws
– see diagram.
Assembly Fireball 37T & 20T CAP
1. Put the foot to the fuel tank holes. Insert screws in the holes and tighten screws
securely with screwdriver.
2. Insert the axe to the wheel supports
hole, insert wheels, put on axe cap.
3. Put the handle and foot to the fuel
tank holes. Insert screws in the holes
and tighten screws securely with
screwdriver, see fig.
Assembly Fireball 60T
1. Insert the axe to the wheel supports
holes of the security bracket, insert
wheels, put on axe cap.
2. Put the security bracket to the fuel
tank holes. Insert screws in the holes
and tighten screws securely with
screwdriver, see fig.
3. Put the handle and foot to the fuel
tank holes. Insert screws in the holes
and tighten screws securely with
screwdriver, see fig.
48