Setting And Starting The Programme With "Delay Start - AEG FAVORIT 35020 I Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2. Check that the water tap is opened
3. Close the dishwasher's door.
4. Turn the programme knob until the programme marker corresponds with the desired
programme (see "Washing programmes" chart).
– The On/Off indicator light illuminates.
– The indicator lights of the phases foreseen for the programme start flashing.
5. Press the START/RESET button, the programme starts automatically and the START/
RESET indicator light illuminates.
– As soon as the programme starts, the phase indicator lights turn off except for the
indicator light for the phase in progress which will remain lit.
During the running of the programme, it is not possible to change the selection made by
turning the programme knob in correspondence of another programme or the Off position.
If you want to change the running programme you must cancel the selection made (see
"Cancel a washing programme in progress").

Setting and starting the programme with "delay start"

• Allows the start of the programme to be delayed by 3 hours.
1. After having selected the washing programme, press the delay start button.
– The corresponding indicator light illuminates.
2. Press the START/RESET button, the countdown of the delay start begins automatically.
– The phase indicator lights turn off.
– Opening the door will interrupt the countdown. Once the door is closed the count-
down will continue from the point at which it was interrupted
– Once the delay start has elapsed, the washing programme will start automatically,
the delay start indicator light turns off, while the indicator light of the phase in
progress illuminates.
Cancelling the "delay start"
• Press the START/RESET button for about 5 seconds, the indicator lights of START/RESET
and delay start buttons turn off while the indicator lights of the phases start flashing.
To start the selected washing programme press the START/RESET button.
The washing programme or the countdown of the delay start will begin only after having
pressed the START/RESET button. Until that moment it is possible to modify the selection
made.
WARNING!
Interrupt or cancel a washing programme in progress ONLY if it's absolutely nec-
essary. Attention! Hot steam may escape when the door is opened. Open the door
carefully.
Interrupt a washing programme in progress:
• Open the dishwasher door; the programme will stop. Close the door; the programme will
start from the point at which it was interrupted.
Cancel a washing programme in progress
Select and start a washing programme
17

Publicité

Table des Matières
loading

Table des Matières