Unloading The Dishwasher; Care And Cleaning; Cleaning The Filters - AEG FAVORIT 35020 I Notice D'utilisation

18

Unloading the dishwasher

• Press the START/RESET button for about 5 seconds. The START/RESET indicator
light turns off and the phase indicator lights are flashing. The running programme has
been cancelled and it is now possible to set a new washing programme or switch off the
machine. If a new washing programme is to be selected, check that there is detergent
in the detergent dispenser.
End of the washing programme
• The dishwasher will automatically stop.
• The end of programme indicator light will illuminate.
1. Switch off the dishwasher by returning the programme knob to the Off position. The
On/Off indicator light turns off.
2. Open the dishwasher's door, leave it ajar and wait a few minutes before removing the
dishes; in this way they will be cooler and the drying will be improved.
Unloading the dishwasher
• Hot dishes are sensitive to knocks.
The dishes should therefore be allowed to cool down before removing from the appliance.
• Empty the lower basket first and then the upper one; this will avoid water dripping from
the upper basket onto the dishes in the lower one.
• Water may appear on the sides and the door of the dishwasher as the stainless steel will
eventually become cooler than the dishes.
CAUTION!
When the washing programme has finished, it is recommended that the dishwasher is
unplugged and the water tap turned off.

Care and cleaning

Cleaning the filters

The filters must be checked and cleaned from time to time. Dirty filters will degrade the
washing result.
WARNING!
Before cleaning the filters ensure that the machine is switched off.
1. Open the door, remove the lower basket.