Packing List - GreenWorks Tools 2401307 Manuel D'utilisation

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
SPECIFICATIONS
Type
Voltage
AIR volume
Air speed
Weight (Without
Battery)
Battery Pack
Charger
Sound pressure
level
Sound power level
Vibration level
DESCRIPTION
See Figure 1.
1. BLOWER TUBE
2. VARIABLE SPEED TRIGGER
3. BATTERY RELEASE BUTTON
4. CRUISE CONTROL LEVER
5. TURBO BUTTON
ASSEMBLY
UNPACKING
Carefully remove the product and any accessories
from the box.
Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing, please call your
Greenworks Tools service centre for assistance.

PACKING LIST

See Figure 2.
Blower
Front Blower Tube
Rear Blower Tube
Operator's Manual
Do not use this product if any parts on the Packing
List are already assembled to your product when you
unpack it. Parts on this list are not assembled to the
product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
English (original instructions)
2401307
60V DC
15.3 m³/min
225.4 KM/H
2.32 kg
2918307/2918407
2918507
83.2dB(A), k:3.0 dB(A)
103 dB(A)
2 2
1.23 m/s , k= 1.5 m/s
WARNING
ASSEMBLING THE BLOWER TUBE
See Figure 3.
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from
the tool when assembling parts.
Connect the rear tube (A) to the front tube (B).
Twist clockwise until the tubes lock into position.
See Figure 3-1.
Align either of the grooves (7) in the tube with the
tabs (6) on the blower housing. Push the tube into the
blower housing until the tab engages the grooves.
Turn the tube in the direction of the arrow until
both of the tabs slide into the lock positions.
See Figure 3-2.
TO REMOVE/INSTALL BATTERY PACK
See Figure 4.
TO REMOVE BATTERY PACK
Press and hold the battery release button with firm
grip.
Grasp the trigger handle firmly. Pull the battery pack
out of the handle.
IMPORTANT! The battery pack is not charged when it
place the battery pack in the battery charger and charge.
Make sure to read all safety precautions, and follow the
instructions in the Battery Charger manual.
TO INSTALL BATTERY PACK
Align the tongue of the battery pack with the cavity in
the handle housing.
Insert the battery into the battery opening until the
battery release button (3) locks into place.
Grasp the trigger handle firmly.
Push the battery pack into the handle until both sides
lock. The latch button will click when locked into place.
Do not use force when inserting the battery pack. It
should slide into place and click.
Follow these instructions in order to avoid injury and to
• Replace the battery pack or the charger immediately
if the battery case or charger cord is damaged.
• Verify that the switch is in the OFF position before
inserting or removing the battery pack.
• Verify that the battery pack is removed and the switch
is in the OFF position before inspecting, adjusting, or
performing maintenance on any part of the blower.
• Read, understand, and follow the instructions
contained in the section entitled Charging Procedure.
1
WARNING
WARNING