brondell Swash CL825 Serie Manuel De L'utilisateur page 7

SAFETY INFORMATION – cont.
(IMPORTANT SAFEGUARDS)
CAUTION
Failure to observe the following warnings may result in electric shock, fire, personal injury,
property damage, or product damage.
• Do not connect the main water supply to the hot water pipe (only connect to the cold water
supply).
• After the installation, make sure to check all water supply connections for leaks. Rubber
washers should be in place for the water connection hoses & T-Valve.
• Do not open/close the seat cover with excessive force.
• Exercise caution that urine does not come into contact with the nozzles - failure to do so
may result in bad odors or malfunction.
• If the product will not be used for a long period of time, unplug the power cord, close the
main water supply valve, and drain any water in the water tank.
• Do not pull out the bidet hose or connection hose using excessive force.
• Do not use thinner, benzene, acidic chemicals, chloride, or hydrochloric acid detergent. This
may result in corrosion to the metal parts or discoloration or scratches to the bidet body.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory, or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning the use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
SAVE THESE INSTRUCTIONS
5