brondell Swash CL825 Serie Manuel De L'utilisateur page 21

USING THE SWASH (cont.)
Water Flow / Water Pressure Adjustment
While the cleansing function is operating, press the Water Pressure "+" and "-" buttons on
the remote control to increase or decrease the water pressure of the spray. There are three
water pressure levels: Low – Med – High.
Wide Spray
To adjust the spray width of the washing stream during a cleansing cycle, press the Wide
Spray button. The Wide Spray button has three levels indicated by lights on the remote
above Wide Spray button:
Concentrated Stream (blue), Medium Stream (pink), Wide Stream (red)
Nozzle Oscillation (Move) Function
While the wash function is operating, press the MOVE button on the remote control to start or
stop the nozzle oscillation function (moving back and forth). This provides a wider range of
cleansing spray.
Adjusting Seat Temperature
Press the Seat Temp. button to adjust the seat temperature to desired level. There are four
temperature levels indicated by the Seat Temp. Indicator light on the remote:
Off, Low - 31° C / 87.9° F (blue), Medium - 34° C / 93.2° F (pink), High - 37° C / 98.6° F (red)
Adjusting Water Temperature
While the wash function is operating, press Water Temp. button to adjust temperature to
desired level. There are four temperature levels indicated by the Seat Temp. Indicator light
on the remote:
Off - incoming water temp., Low - 31.7° C / 89° F (blue), Medium - 34.5° C / 94.1° F (pink),
High - 37.5° C / 99.5° F (red)
19