Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
Charger safety instructions
Keep the charger away from rain and moisture. There is a risk of electric shock if water
•
gets into a charger.
Only charge the suitable, approved battery. The battery voltage must match the
•
battery charging voltage of the charger. Otherwise there is a risk of fire and explosion.
Keep the charger clean. There is a risk of electric shock if the charger is dirty.
•
Check the charger, cable and plug before each use. Do not use the charger if you
•
notice any damage. Do not open the charger. Damaged chargers, cables and plugs
increase the risk of electric shock.
Do not operate the charger on readily combustible surfaces. There is a risk of fire due
•
to the waste heat given off by the charger during charging.
Take care when touching the charger during charging. Wear protective gloves. The
•
charger can become very hot, especially at high ambient temperatures.
Children and persons who, on account of their physical, sensory or mental abilities or
•
inexperience or lack of knowledge, are unable to operate the charger safely must not
use it without supervision or instruction from a responsible person. Otherwise, there is
a risk of incorrect operation and injury.
General care instructions
Warning!
Remove the battery before doing any work on your E-Bike, such as maintenance or care.
Unintentional activation of the electrical system can cause the pedals to turn, which can
cause injuries.
Regular maintenance
Maintain your E-Bike regularly and ask your dealer to carry out the regular maintenance
work to guarantee the lasting and safe function of all parts. Only take on tasks for which
you have the necessary specialist knowledge and tools.
Cleaning and care
Dirt and salt from winter road maintenance or sea air, as well as sweat can damage your
E-Bike. You should therefore regularly clean your E-Bike and protect it against corrosion.
32
Components: function and handling
Publicité
Chapitres
Table des Matières
