Lighting System - RIESE & MULLER Roadster 2022 Traduction De La Notice Originale

Components: function and handling
Air pressure on HS models
For HS models, maintain the air pressure according to the table on your bike. The air
pressure depends on the tire type and load.
Warning!
Tires with worn tread or brittle edges should be replaced by your dealer. The internal
structure of the tire can be damaged by moisture or dirt.
Faulty rim bands (layer of plastic between the inner tube and rim) must be replaced
immediately.
Also make sure that the valve is straight. In extreme cases, damage to the tires can result
in the inner tube bursting suddenly, causing a crash.

Lighting system

Riese & Müller E-Bikes are programmed to have daytime running lights to ensure high
visibility and safety in traffic at all times of day. The power consumption due to the
daytime running light is negligible. On S-Pedelecs, the daytime running light is a legal
requirement.
Adjusting the dipped beam
1. The centre of the area illuminated by the front light must not hit the road more than
10 m away from the E-Bike.
2. To adjust the dipped beam, loosen the headlamp fastening screw and tilt the
headlamp accordingly.
3. Then retighten the fastening screw.
English
27