English
Quick check
Check the following points on your E-Bike before every ride:
Quick-release skewers/axles are securely fitted and are firmly closed.
•
Screw connections are neither loose nor do they rattle.
•
The handlebars are firmly fixed (check both handlebar and stem for movement; for
•
height-adjustable stems, check the pin is engaged) and do not show any unusual
behaviour when steering left and right (e.g. play in the steering, uneven resistance or
softer/less direct steering feel than usual).
Wheels and tires turn easily and are sufficiently true. Check the air pressure and
•
condition of the tires and that the valves are seated straight.
Front and rear lights work and are correctly adjusted.
•
Brake levers have a clear pressure point and cannot be pulled all the way to the
•
handle.
Brake pads and brake discs are intact and free of grease/oil. Also check them for wear.
•
There is no leakage of oil at any point on the brake system when you pull and hold the
•
brake levers.
The brake anchor for coaster brakes is firmly attached.
•
The battery is firmly in place after being inserted. The battery must engage in the lock
•
with an audible click.
The load is properly secured. There must be no loose fasteners that can get caught in
•
the wheels (e.g. ends of lashing straps hanging down).
The permissible total weight, taking into account the specified individual payloads, is
•
not exceeded (see "Weight specifications").
There is no rattling. There are no unusual riding noises and the ride does not feel
•
spongy.
The load is evenly distributed. The riding behaviour and braking distance might change
•
as a result.
The lights and reflectors are not covered.
•
16
Before every ride