Seat Position - RIESE & MULLER Roadster 2022 Traduction De La Notice Originale

English
For an EMERGENCY STOP, pull the rear brake lever and stop pedalling. The E-Bike comes to
a stop.
Familiarise yourself with the drive system, the display and the gears away from traffic. For
more information on how to use all installed components, see www.r-m.de/downloads.

Seat position

Ask your dealer to adjust and explain the ideal seat position.
Warning!
Familiarise yourself with how your different shoes grip on the pedals. Depending on the
material of your shoe soles or in cold and/or wet weather, pedals can become slippery.
Suspension
Ask your dealer to adjust and explain the suspension.
In order for the suspension fork and shock absorber to function optimally, they must
be adjusted to the rider's weight, riding posture and intended use. When sitting up,
the suspension fork and shock absorber should dip by approx. 20% of the maximum
suspension travel.
Warning!
The rear suspension alters the distance between the pedals and the ground when riding.
When going into a bend or when riding over bumps in the road, keep the crank arms
in a horizontal position to prevent the pedals from touching the ground and to avoid a
potential crash.
Battery
Ask your dealer to show and explain how to insert and remove the battery or watch our
videos on this subject at www.r-m.de/video-guides. Ensure that the battery is properly
in place each time it is inserted. Push the battery into its holder until it clicks into the lock.
Remove the key from the lock and pull the battery to check if it has indeed locked into
place. On some E-Bikes, the battery is fixed to the frame, suspended either horizontally or
vertically. Make sure you hold the battery with one hand before turning the key in the lock
so that the battery does not come loose and fall down. This can cause injuries and damage
the battery.
14
Before the first ride