Erbauer ERN647ATL-I Mode D'emploi page 12

REPLACEMENT OF DIE AND BLADE
,0
H
1. Disconnect the
2. Loosen the fixing nut (F) counterclockwise
with a wrench (not provided). (See Figure 8)
3. Remove the die (D) by screwing it
out counterclockwise with the
wrench. (See Figure 9)
4. Remove the blade base (Part #34) with the
blade (E) by screwing the blade base
counterclockwise with the wrench.
(See Figure 10)
tool (A) from air supply.
AIR NIBBLER
blade base