Copying On An S-Vhs (Or A Vhs) Cassette; Using The Dv Cable For Recording - Panasonic PV-GS9 Mode D'emploi

To Dub Audio While Listening to a Pre-recorded
Sound
When pausing the audio dubbing, set the [12bit
AUDIO] on the [PLAYBACK] Sub-Menu to [ST2]
and you can check the pre-recorded sound.
When a microphone (PV-GS15 only) is used for
audio dubbing, use headphones to listen to the
pre-recorded sound while dubbing the audio. (When
using headphones, set [AV JACK] on the [INITIAL]
to [OUT/PHONES].)
When the line input is used, you can dub audio
while listening to the pre-recorded sound from the
speaker.
• For other notes concerning this item, see page 65.
Copying on an S-VHS (or a VHS)
Cassette
( Dubbing)
After connecting the Camcorder and the VCR as
illustrated, start the following procedures.
[S-VIDEO IN]
2
(PV-GS15 Only)
AV Cable
1
S-Video Cable (not supplied)
2
• Be sure to press the [OSD] Button (p. 14) on
the Remote Control prior to copying so that no
indications are visible. Otherwise, the displayed tape
counter and function indications are also copied.
Editing Mode
Camcorder:
1 Insert the recorded Cassette.
VCR:
2 Insert an unrecorded Cassette with an
erasure prevention tab.
• If various setups (such as external input, tape
speed, etc.) are required, please refer to the
operating instructions of your VCR.
Camcorder:
3 Press the [►] Button to start playback.
VCR:
4 Start recording.
5 Press the Pause or Stop Button to stop
recording.
Camcorder:
6 Press the [

Using the DV Cable for Recording

(Digital Dubbing)
By connecting this Camcorder with other digital video
equipment (such as another Camcorder of the same
format/model) that has a DV input/output Terminal, and
using a 4-pin to 4-pin DV Interface Cable PV-DDC9-K
(optional)
dubbed in the digital mode.
[VIDEO IN]
[AUDIO IN]
1
Player/Recorder:
1 Insert the Cassette and set to Tape Playback
Mode.
Player:
2 Press the [►] Button
] Button to stop playback.
, high quality images and sounds can be
1
1
to start playback.
72
72
70
54
69
45