Downloading The Dts Play-Fi App; Connecting To A Wireless Network: Access Point Setup - Martin Logan Bravado Manuel De L'utilisateur

• Rapid Blinking: booting up.
• Blinking: connecting to a wireless router.
• Slow Pulse: Access Point Setup Mode.
• Two Blinks & Pause: WPS (Wi-Fi Protected
Setup) Mode.
• Solid: Connected to a wireless router.
• Off: Connected to a router via Ethernet.
DOWNLOADING THE DTS PLAY-FI
• Android Device Users: Download DTS's free Play-Fi
app from the Google Play
• iOS Device Users: Download the DTS's free
Play-Fi app from the Apple App Store.
• PC Users: Download DTS's free Play-Fi program
from https://play-fi.com/apps/windows
CONNECTING TO A WIRELESS NETWORK:
ACCESS POINT SETUP
Access Point Setup causes your MartinLogan
wireless product to behave as if it were a wireless
router. Using your mobile device or Wi-Fi capable
PC, you connect directly to your wireless product
using Wi-Fi, select your home wireless network,
and enter the network password.
1. For optimal setup conditions place your wireless
product next to your wireless router. The device
can be moved to its final location after wi-fi setup.
2. Plug in your wireless product and press the
Power button. The Wi-Fi Indicator light will start
rapidly blinking for about 20 seconds while your
wireless product is booting up. If your wireless
product is not configured to connect to your
network, it will continue to blink. If this is the first
time your new wireless product is plugged in,
the Wi-Fi Indicator light will start pulsing slowly.
If the wireless product is already configured to
connect to a wi-fi network, the button will turn
solid (connected) or blink rapidly (not connected).
APP
®
or Amazon App Store
® ®
3. Once the Wi-Fi Indicator light starts pulsing
slowly, your wireless product is in Access Point
Mode and ready to connect to your wireless
network. Note: If the Wi-Fi Indicator light does
not pulse slowly, press and hold the Wi-Fi Setup
button for 8 seconds. You will hear two tones—
one at 3 seconds and another at 8 seconds.
After 20 seconds, the Wi-Fi Indicator light will
begin pulsing slowly to indicate Access Point
mode is ready. At anytime you can press the
button again to cancel the setup mode.
.
Android Device Users:
a) Launch the DTS Play-Fi app.
b) The app will automatically find your device
and provide prompts for setup.
c) Touch the "Setup" button on the screen.
d) Enter the password for your wireless network;
the app will connect your device to your
network. You will notice the Wi-Fi Indicator
light will have changed from blinking to
solid. This may take up to a minute. If, after a
minute, the button continues to blink rapidly,
setup failed and you should try again.
e) Your wireless product is now connected
to your wireless network. Reconnect your
mobile device to your wireless network. You
may re-name your device using the app.
iOS Device Users:
Please note: When using an iOS device your
wireless product can stream audio using either
Apple AirPlay or DTS Play-Fi.
a) Make sure your iOS device's Wi-Fi is turned
on and connected to your Wi-Fi network.
b) Open your iOS device's 'Settings' app
and go to the 'Wi-Fi' menu. Your wireless
product will show up under the heading '
up new airplay speaker
c) Select your wireless product from the list. It
will have "Play-Fi " in the name.
d) Once in the 'AirPlay Setup' menu you will
be prompted to select your Wi-Fi network
set
...'
15