Martin Logan Bravado Manuel De L'utilisateur page 25

No output from the wireless product.
• Check that the wireless product is turned on.
• Check that the wireless product is not muted.
• Check that the wireless product's volume is not
turned all the way down.
• Check that the wireless product is set to the
proper input.
• Check that all system components are turned
on and source material is playing.
• Turn the wireless product off and on using the
Power button.
• Unplug the wireless product, wait 30 seconds,
and plug it back in.
• Check that all interconnecting cables are con-
nected at both ends.
• If necessary, try connecting an alternate source
component to make sure the original source
component isn't the problem.
When using the Analog Input, sound is
coming from both my wireless product
and my connected television.
• When utilizing the wireless product to repro-
duce audio, the television's audio output should
be defeated. Some televisions will allow you to
turn off the internal speaker via the television's
menu system. Other televisions may require you
to turn the television's volume to "zero" or to
"mute" the television.
When using the Analog Input, the wire-
less product is too quiet even when the
wireless product is turned up.
• Check that the output on your television or
other source components are not connected via
a variable level output. Sometimes this option
may be configured in your source components
menu. Please refer the manual for the source
component in question.
No sound coming from external sub
• Check that the external sub is turned on.
• Check that the subwoofer cables are attached
to the Sub Out connection on the wireless
product and to the appropriate input on the
subwoofer.
• Turn the wireless product off and on using the
Power button.
• Unplug the wireless product, wait 30 seconds,
and plug it back in.
External sub is too quiet.
• Turn up the volume on the subwoofer.
• Try moving the subwoofer to a different loca-
tion in the listening room.
My wireless product is not behaving as
expected.
• Turn the wireless product off and on using the
Power button.
• Unplug the wireless product, wait 30 seconds,
and plug it back in.
25