General Use - Barbecook Hercules Mode D'emploi

• Never place the device on a flammable surface (e.g. table cloth, carpet, etc.).
• Always place the barbecue in a well-ventilated area. Do not block the ventila-
tion slots of the device. Keep a minimum distance of 10 cm (5") to walls or
other items.
• Do not place next to devices or objects, which react sensitively to magnetic
fields (e.g. radios, TVs, etc.).
• Do not place next to open fires, heaters or other sources of heat.
• Make sure that the connection cable is not damaged or squashed beneath
the device. Make sure that the connection cable does not come into contact
with sharp edges and/or hot surfaces.
INducTION HOTPlATe BAsIc 1800
• Model: C18G (CE/EMC)
• Temperature range: 60 - 240 °C
• Power: 1800 W
• Connection: 230 V ~ 50 Hz
With induction hotplates, an electric voltage is applied on a conductor spool be-
neath the glass ceramic surface. This creates magnetic fields, which directly heat
up the bottom of the cookware through a physical effect. This means saving time
and energy, because contrary to common hotplates, the cookware is heated up,
not the heating element and the glass ceramic surface.

GeNerAl use

• Plug the power plug into a suitable outlet.
• The control lamp of the On/Off switch lights up and an acoustic signal
sounds. Now the device is in standby mode.
• Place suitable cookware (stainless steel, cast iron and enamelled flat-bottom
pans with a diameter of 12 - 26 cm) in the centre of the hotplate.
• Now press the On/Off switch to turn on the induction hotplate. The "Tem-
perature" indicator light blinks and an acoustic signal sounds.
• Now press the "Function" button:
1 x
2 x
• Timer Function:
After the selection of the operating mode (power level or temperature level)
press the "Function" button until the corresponding indicator light blinks
|
8 www.barbecook.com
the preset temperature stage "120°C" are selected and the de
vice is turned on (Temperature levels: 60, 80, 100, 120, 140,
160, 180, 200, 220 and 240°C).
With the selection buttons (+,-) you can change the temperature
setting from 60 - 240°C.
the preset power level "5" is selected and the device is turned
on (Power levels: 1, 2, 3, 4, 5, 6, 7, 8, 9 and 10).
With the selection buttons (+,-) you can change the power setting
from 1 - 10.