The Sounddecoder (Only For 72165 And 78165); S 160 Function Key Allocation (Delivery State); Locomotive Settings - Roco S 160 CSD Manuel

▪
S 160 function key allocation (delivery state)
The factory-set default address of the lok is 03.
F-Key Function
F1 Travel sound on/off
F2
Whistle
F3 Whistle
F4 Conductor whistle
F5 Scoop of coal
F6
Shunting mode
F7 Air pump
F8 Injector
F9 Coupling
F11
Blow-down
F12 Whistle
F13 Drainage (only if F1 is active)
F14 Mute - Key
F15 Squeaking points
F20
Rattlesnake
▪
Locomotive Settings
The Sounddecoder has been optimally adjusted to this locomotive. You can still adapt numerous
decoder properties to your wishes however. Certain parameters (referred to as CVs – Configu-
ration Variable – or register) can be amended.
Please check before each programming if this is really necessary. Incorrect settings can result in
the decoder not reacting correctly.
The decoder is preprogrammed with 128/28 speed steps at the factory for a high level of com-
fort. This means that it can be used together with all of the modern DCC (MULTIMAUS
Motorola control devices.
2)
The Sounddecoder has been especially modified for the additional functions and must
not be replaced with a decoder which is available from a retailer.
If the locomotive is to be reprogrammed, only the locomotive is to be on the program-
ming track.
8072164920 in Frutiger.indd 19
The Sounddecoder


) and
®
19 19
19
21.11.2017 14:15:19