Retrofitting A Plux Decoder (Only For Item 72164); Maintenance Of The Model; Decoupling Of Locomotive And Tender - Roco S 160 CSD Manuel

▪
Retrofitting a PluX decoder (only for Item 72164)
Remove the jumper from the interface.
Finally put the plug of the chip into the interface
as shown.
Decoder 22-pin
(10896/10891)
In order to ensure that your locomotive provides you with many years of pleasure, certain service work at
regular intervals (approx. every 30 operating hours) is advisable.
Before commencing care and maintenance work on the model, first uncouple the locomotive from the
tender.
▪
Decoupling of locomotive and tender
▪
Cleaning of the wheel-current contacts
Wheel contacts easily get dirty on tracks which are not entirely clean. Use a small brush to
remove dirt from spots marked.
16
16
8072164920 in Frutiger.indd 16
Decoder 16-pin
Maintenance of the model
21.11.2017 14:15:18