Hornbach 10329557 Manuel D'installation Et De L'utilisateur page 210

Connecting the top face plate
Peel of the protective foil from
the top face plate
Slide the slot nuts in the
backside beam under the holes
in the top face plate.
Attach the top face plate
to the slot nuts using M6x16
full thread bolts and Ø6x16
washers
Finish the top face plate
Place the two top corner face
plates on the edges between
backside beam and top face
plate, each in the corresponding
corner (L/R). Fix the top corner
face plates in place with two
M6x30 full thread bolts
two Ø6 rings (2 x)
The installation of the pergola
awning is now complete.
210 | ENGLISH
14
.
.
15
and
respec-
tively.