Hornbach 10329557 Manuel D'installation Et De L'utilisateur page 204

Connection of LED stripes 4x
Connect the LED stripe cables
in all four corners. Rotate the
plugs against each other until
they fit. Make sure that in the
rear corners the cable can not
touch the motor shaft.
Mounting bracket 2x
(e.g. in concrete)
The mounting brackets
be installed in equal height
about 250 cm above the ground.
The distance X between the
insides of the mounting
brackets
10329557: 385 cm
10329559: 385 cm
10329560: 285 cm
Mark the installation holes (4 x)
of the mounting brackets
Caution: The free-standing may
collapse when fixed improperly!
According to your wall type,
drill the holes and insert
suitable plugs (4 x) (see section
"Mounting material").
Install the mounting brackets
(2 x) with the pointy side
facing downwards and the
curved side facing upwards.
Ensure they are securely fixed in
204 | ENGLISH
4
5
must
:
on
the wall.
place.