Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Left and right beams
Attach the corner brackets (4 x)
to the ends of the left and
right beams
of the pergola
awning. Make sure that the slit
sides of the beam point in the
same direction as the open ends
of the corner brackets
screws or bolts are required for
this step.
Front and backside beams
Connect the motor shaft in the
backside beam
to the shaft
in the right beam
as follows
(back to front): M6x8 bolt
Ø6 washer
, M6 washer
(plastic)
Connect the motor shaft in the
backside beam
to the shaft in
the left beam
as follows (back
to front): M6x8 bolt
, Ø6 wash-
er
, M6 washer (plastic)
In all corners connect the beams
and the corner brackets by
means of four M6x10 full thread
screws
Attention: Take care not to move
the slide in the left and right
beam before or during assem-
bly. Do not pinch the LED cables
during assembly.
202
|
ENGLISH
1
. No
2
,
.
.
.
L
R
Publicité
Chapitres
Table des Matières
Dépannage
