Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TECHNICAL DATA
Parameter description
Parameter value
PNEUMATIC FILLING
Product name
MACHINE
Model
MSW-FMP-01
Tank capacity [L]
10
Feeding range [mL]
5-50
Nozzle hole diameter
ɸ 4,8
[mm]
Working air pressure
0,4-0,6
[MPa]
Dimensions [mm]
285x285x720
Weight [kg]
10,7
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
using
state-of-the-art
technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Only use indoors.
PLEASE NOTE! The drawings in this manual are for
illustration purposes only and in some details may
differ from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
The terms "device" or "product" are used in the warnings
and instructions to refer to PNEUMATIC FILLING MACHINE.
6
U S E R M A N U A L
2.1. SAFETY IN THE WORKPLACE
a)
Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b)
If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
c)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
d)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
e)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
f)
Only connect and disconnect the pressure line when
the air valve is closed.
g)
Do not point the pressure line towards yourself or
toward other people or animals.
h)
Do not cut off the supply of compressed air by
crushing or bending pressure hoses.
i)
When starting the device, increase the air supply
to the device gradually in order to ensure that it is
and
functioning properly. If you notice any abnormal
operation of the device, disconnect it immediately
from
the
compressed
air
and
contact
manufacturer's service point.
j)
Please keep this manual available for future reference.
If this device is passed on to a third party, the manual
must be passed on with it.
k)
Keep packaging elements and small assembly parts in
a place not available to children.
l)
Keep the device away from children and animals.
m)
If this device is used together with another equipment,
the remaining instructions for use shall also be
followed.
REMEMBER! When using the device, protect children
and other bystanders.
2.2. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instruction on how to operate the device.
c)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
d)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
e)
Remove all adjusting tools or spanners before turning
the device on.
f)
Compressed air may cause serious injury.
g)
The device is not a toy. Children must be supervised to
ensure that they do not play with the device.
h)
Do not put your hands or other items inside the
device while it is in use!
Rev. 29.06.2020
2.3. SAFE DEVICE USE
a)
Make sure the pressure line is disconnected before
attempting any adjustments, accessory replacements
or doing any work on the device. Such a preventive
measure reduces the risk of an accident.
b)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c)
Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
d)
Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
e)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
f)
Avoid situations where the device stops working
during use due to excessive loading. This may result
in overheating of the drive elements and damage to
the device.
g)
Do not move, adjust or rotate the device in the course
the
of work.
h)
Clean the device regularly to prevent stubborn grime
from accumulating.
i)
Only use air to supply the device, do not use any other
gases.
j)
At locations where there is a high risk of mechanical
damage, use a reinforced hose for compressed air
connections.
k)
Before each use ensure the nozzle is correctly installed
in the device and that the hose is correctly attached
and undamaged.
l)
Do not carry or hang the device by the pressure line.
m)
Do not touch any moving parts or accessories
unless the device has been disconnected from the
compressed air supply.
n)
If you notice a leak from the device or hoses,
immediately disconnect the compressed air supply
and resolve the defects.
o)
Do not exceed the recommended supply pressure as
this may damage the device.
p)
The device is not a toy. Cleaning and maintenance may
not be carried out by children without supervision by
an adult person.
q)
Do not run the device when empty.
r)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
s)
Do not overload the device.
t)
Do not exceed the maximum permissible operating
pressure!
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
Rev. 29.06.2020
3. USE GUIDELINES
The device is intended for filling containers with liquids of
uniform consistency (e.g. water, shampoo, oil, cream).
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
A
B
C
D
H
G
I
J
L
K
M
A.
Cover
B.
Tank
C.
Nozzle
D.
Liquid amount regulator
E.
Button
F.
Button
G.
Piston
H.
Air inlet
I.
Adjusting screw
J.
Base
K.
Air outlet
L.
Pressure speed regulator
M.
Filling speed control valve
3.2. PREPARING FOR USE
APPLIANCE LOCATION
Keep the product away from hot surfaces. The device
should always be used when positioned on an even, stable,
clean, fireproof and dry surface, and be out of the reach
E
F
7
Publicité
Table des Matières
