Safety Recommendations - MSW WP-10T Manuel D'utilisation

USER MANUAL
M S W - W P - 1 0 T
M S W - W P - 3 0 T
M S W - W P - 3 0 T- P
M S W - W P - 5 0 T- P
M S W M O T O R T E C H N I C S

SAFETY RECOMMENDATIONS

Operation manual must be used reviewed before the use and operation of the device.
This machine conforms to CE declaration.
Note! Make sure bystanders remain within a safe distance from the working area.
Attention! There is a danger of accident.
Attention! There is the risk of hand being crushed.
Attention! Wear protective helmet.
Attention! Wear protective footwear.
Attention! Wear protective gloves.
NOTE
The operating manual is in German therefore other language versions are translations from the original.
PLEASE NOTE! Drawings are for illustration purposes only and in some cases may differ from the product.
1. Before commencing work make sure to read and understand the operation manual! Safety
recommendations must be followed at all times to avoid injury and damages occurring from misuse!
2. This operation manual must be retained for future reference. If the machine is passed onto a third
person, the operation manual must also be passed on.
3. If the machine is operated other that its intended use or is damaged due to improper handling, the
seller/manufacturer are not liable for any resulting damage.
4. The machine should be only operated by healthy physically fit persons who are able to handle the
machine, are trained and who have reviewed the manual and received occupational health and safety
training.
5. The machine is not designed to be handled by persons (including children) with limited mental and
sensory functions or persons lacking relevant experience and/or knowledge unless they are supervised
by a professional.
II. SAFE OPERATION PRINCIPLES / WARNINGS
1. Review this operation manual and the safety recommendations prior to each use of the machine.
2. Before each use make sure to check if parts are worn or damaged. This machine must not be operated
if its parts are worn or damaged. If the machine has been overloaded or subject to strong shock/
vibrations, it must be inspected by a qualified service technician before commencing any work on the
machine.
3. This machine must not be operated if it is damaged. If such condition occurs the machine must be
handed over to an authorized service center for inspection and repair.
4. Comprehensive periodic inspections of the machine must be carried out and worn/damaged parts
must be replaced on an on-going basis.
5. Do not dismount or replace any parts of the machine.
6. Use only original manufacturer recommended spare-parts.
7. This machine may only be handled by persons trained in safety regulations and physically able to
operate the machine.
8. Do not overload the machine by exceeding the maximum admissible load.
9. Do not strike the press or the work piece.
10. Unauthorised persons are forbidden from approaching a loaded press.
11. Unauthorised persons should be warned of the machine's operation and should maintain a safe
distance from the press.
12. Always pay close attention to the work piece.
13. Do not leave the work piece unattended whilst being worked on.
Rev. 09.12.2016
17