Ordering Information - Thermo Scientific mySPIN 12 Manuel D'instructions

Maintenance
Your mini-centrifuge is maintenance-free. Clean unit only when it is not plugged into
an electrical outlet. When necessary, the housing and rotor can be wiped using a
damp cloth and a mild, non-corrosive detergent.
WARNING
Do not use any solvent on the unit that may attack plastic or cause cracks
in the rotor. Ensure the rotor is protected from corrosion and mechanical
damage. The rotor must be cleaned with a neutral cleaning liquid.
If hazardous sample is spilled on the unit and or leaked into the unit, do not
run the centrifuge unless it is safe to do so.
Dissassembly of Rotors for Cleaning
1. Remove rotor from unit.
2. Remove screws from the bottom of the rotor.
3. Clean as needed.
4. Reassemble rotor, making sure that the alignment tab is engaged into the
slot.
5. Test run reassembled empty rotor to ensure it is still balanced.
Notice
Ensure all parts are throughly dried prior to operation.

Ordering Information

Standard Rotor.............................................................75004083
Strip Tube Rotor............................................................75004084
Rotor Knob...................................................................50144571
Standard Rotor Cover....................................................50144572
11