Zeiss ApoTome.2 Mode D'emploi page 15

ApoTome.2
11 HOW TO GET TO THE FIRST PICTURE
In the first click-stop position, conventional imaging is possible (free passage). In the second click-stop
position, the transmission grid is moved into the beam path.
Click-stop position 1
In click-stop position 1 of the ApoTome.2 slider, an open passage is in the reflected light beam path. In
this position the microscope can be operated in the conventional way. The slider does not affect any
function of the microscope stand used.
Click-stop position 2
In click-stop position 2, the transmission grid is positioned in the beam path of rays. All functions for the
adjustment and control of the instrument are operated via the software. For additional information, refer
to the Operating Manual of the software used.
12 SWITCHING OFF SAFELY
• After use, switch the device off by activating the on/off switch (Fig. 3/3) at the front panel of the
ApoTome.2 control box.
• The power indicator in the switch turns off.
09/2017
HOW TO GET TO THE FIRST PICTURE
423667-6044-008
ZEISS
13