Publicité
Les langues disponibles
Les langues disponibles
ZEISS
10
SWITCHING ON SAFELY
•
Carefully insert the ApoTome.2 slider in the plane of the luminous-field diaphragm of the reflected
light beam path of the microscope used (see complete operating manual of the microscope).
On insertion, a short beep signal is generated.
•
Use the on/off switch (Fig. 3/3) at the front panel of the ApoTome.2 control box to switch the device
on.
•
The power indicator in the switch lights up.
Switch on the device approximately 15 minutes before the first image capture in order to allow it to
warm up to the necessary operating temperature.
The slider must be inserted in the microscope stand to warm up properly.
1
Click stop position 1 - free passage
2
Click-stop position 2 - transmission grid
3
On/off switch
Fig. 3
Control and functional elements of ApoTome.2
12
SWITCHING ON SAFELY
423667-6044-008
ApoTome.2
09/2017
Publicité
