Adjusting the Glass Shelves
The refrigerator shelves are glass. Therefore, they are
heavy and - although made from safety glass - are
breakable.
Removing the Shelves
Use both hands when removing and installing all shelves
and drawers.
1. Place the palms of your hands (face-up) underneath
the shelf toward the back rails
2. Keeping the shelf level, lift the entire shelf straight up
to disengage the lock
Make sure the front is not tilted higher or lower than
the back of the shelf.
3. Pull the shelf toward yourself
Installing the Shelves
1. Place your hands at the back corners of the shelf
Balance the shelf in the palms of both hands.
2. At the same time, insert each back prong into its notch
located in the shelf rail
3. Make sure to perform Steps 1-2 for both sides of the
shelf at the same time.
User Instructions
1
.
2
.
3
.
2
.
3
Removing Glass Shelves
1
24
2
1
3
1
rail
1
2
prong
rail
Installing Glass Shelves
2
1
2