Setting The Controls - Dacor DYF42BIWS Manuel D'utilisation Et D'entretien

To Turn the Main Power Switch On or Off:
1. Remove the top grille.
2. Press the main power switch to the ON or OFF position.
3. Replace the top grille.
IMPORTANT: Be sure the
main power switch is set to the
ON position after cleaning the
refrigerator or changing light bulbs.
A. Power switch

Setting the Controls

The control panel is located inside the refrigerator compartment
on the ceiling.
IMPORTANT:
„ The refrigerator control adjusts the refrigerator compartment
temperature. The freezer control adjusts the freezer
compartment temperature.
„ Wait 24 hours after you turn on the refrigerator before you put
food into it. If you add food before the refrigerator has cooled
completely, your food may spoil.
NOTE: Adjusting the refrigerator and freezer controls to a
lower (colder) setting will not cool the compartments any
faster.
„ If the temperature is too warm or too cold in the refrigerator
or freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.
„ The preset settings should be correct for normal household
usage. The controls are set correctly when milk or juice is as
cold as you like and when ice cream is firm.
„ The actual temperature may differ from the display when a
door is open for an extended period of time.
NOTE: The factory recommended settings are 0°F (-18°C) for the
freezer and 37°F (3°C) for the refrigerator.
Refrigerator Operation
A
Turning the Refrigerator On or Off
„ Touch and hold the COOLING ON/OFF
key for 3 seconds.
NOTE:
„ After the refrigerator is turned on, the over
temperature audio alarm and indicator
light will activate every 1½ hours until the
refrigerator and freezer temperatures are
below 48°F (9°C) and 15°F (-9°C), respectively, or until the
alarm is turned off. To turn off the audio alarm and indicator
light, see Master Alarm Reset on page 5.
„ The COOLING ON/OFF key on the control panel shuts down
the cooling system, fans and compressors as well as the
control panel lights. To turn the power off completely, use the
main power switch located behind the top grille.
Setting the Temperature Scale
„ Touch the F/C key. To re-display degrees Fahrenheit,
touch F/C again. NOTE: If the freezer temperature
is below zero, the negative sign next to the freezer
display will light up. This is normal.
Adjusting the Temperature Setting
NOTE: Wait at least 24 hours between adjustments. Re-check the
temperatures before other adjustments are made.
To adjust the temperature setting:
„ Touch the refrigerator or freezer UP () or DOWN () key
until the desired temperature is reached.
„ Touch the Set To Recommended key to reset the set points to
the factory recommended temperatures.
NOTE: The adjustable temperature range for the freezer is -5°F
to 3°F (-21°C to -16°C). The adjustable temperature range for the
refrigerator is 33°F to 42°F (1°C to 5°C).
Use the table below for guidance if you need to change the
temperature.
CONDITION/
REASON:
REFRIGERATOR too cold
Not set correctly for conditions
REFRIGERATOR too warm
High use or room very warm
FREEZER too cold
Not set correctly for conditions
FREEZER too warm/too little ice.
High use or heavy ice use
Max Cold
The Max Cold feature assists with periods
of heavy ice usage, full grocery loads or
temporarily warm room temperatures.
Touch the MAX COLD key to turn on the Max
Cool feature. The Max Cold light will remain
on for 24 hours unless manually turned off.
NOTE: The refrigerator temperature display
will remain at 34°F (1°C) and the freezer temperature display will
remain at -5°F (-21°C) while the Max Cold feature is on. After 24
hours, the refrigerator will automatically return to the previous
temperature settings.
4
COOLING ON/OFF
light
TEMPERATURE
ADJUSTMENT:
REFRIGERATOR Control 1°
higher
REFRIGERATOR Control 1° lower
FREEZER Control 1° higher
FREEZER Control 1° lower
MAX COLD
light