Installer Setting - Setting Address Of Central Control; Installer Setting - Checking Address Of Central Control - LG UV42 Manuel D'installation

INSTALLATION INSTRUCTIONS
18

Installer Setting - Setting Address of Central Control

Installer Setting - Checking Address of Central Control

1 . With the FUNC. button pressed, press the RESET button.
2
. Press the ON/OFF button toward the indoor unit 1 time, and the indoor unit will display the set
address in the display window.
• The address display time and method can differ by the indoor unit type.
3
. Reset the remote controller to use the general operation mode.
1
. With the MODE button pressed, press the
RESET button.
2
. By using the temperature setting button,
set the indoor unit address.
• Setting range : 00 ~ FF
3
. After setting the address, press the
ON/OFF button toward the indoor unit 1
time.
4
. The indoor unit will display the set address
to complete the address setting.
• The address display time and method can
differ by the indoor uint type.
5
. Reset the remote controller to use the
general operation mode.