Zero" Or "Tare" Function - Baxtran STEELKS Mode D'emploi

2. Volume indication mode
A. Place the scale on a solid and flat surface.
B. Press to turn on.
C. Wait unitl LCD shows "0", and press MODE button to choose
"Water" or "Milk" mode.
D. Put a liquid container into the scale platform. LCD shows weight of
container.
E. Press button to zero or tare weight.
F. Pour liquid (water or milk) into the container, LCD shows the
volume of the liquid.
G. Press MODE button to choose "Weight" mode and view the weight
of liquid.
10

8. "ZERO" OR "TARE" FUNCTION

To weight different loads consecutively without removing loads from
the scale. Put first Load on the scale, get weight reading. Press button
to reset the LCD reading to "0" before adding next load. You can repeat
this operation.
Condition 1: "ZERO" funciton When total sum of all loads on scale
≤ 4% of scale's max. weight capacity is 2000g; 200g when capacity
is 5000g)
LCD will show ----- or 0g each time is pressed ----- means not stable,
please wait for a moment. 0g and meanwhile an icon o on the left side
of LCD mena ZERO funciton is activated. Max. weight capacity remains
unchyanged.
Condition 2: "TARE" function. When total sum of all loads on scale
> 4% of scales max weight capacity. (4%=80g when capacity is
2000g; 200g capacity is 5000g)
LCD will show ---- or 0g each time iss pressed. ---- means not stable,
please wait for a moment. 0g and meanwhile an icon T on upper left
corner of LCD mean TARE function is activated. Max. Weight capacity
is reduced by total weight of all loads.
Under this condition:
By pressing, you can see the total weight of all loads an the scale. If you
want to weight more loads, just press to reset LCD reading to "0" again.
USER MANUAL STEELKS EN