Tripp-Lite SmartOnline SVT Serie Manuel Du Propriétaire page 25

4. Operation
Operating mode/status
Bypass mode Description
LCD screen
Battery test Description
LCD screen
Warning status Description
LCD screen
When input voltage is within acceptable operating range and the bypass is enabled, the UPS
will turn off and enter Bypass mode. The alarm will beep every two minutes.
When UPS is in Online mode or Freq. Converter mode, press the "Test" key for longer than 0.5
seconds. The UPS will beep once and start "Battery Test". The line between I/P and inverter
icons will blink to remind the user. This operation is used to check the battery status.
If some errors occur in the UPS (but it is still running normally), it will show one more screen
to represent the warning situation. In the warning screen, the
codes may be displayed, each code indicating one error. The code meaning can be found in
the Warning Code table 4.11 on page 27.
25
icon will flash. Up to 3 error