Crosby IP IPPE10 Mode D'emploi page 6

These areas of damage, precisely as wear, are not covered by the warranty. In most cases how-
ever the areas of damage are much less extensive. In doubtful cases an authorised repairer should
assess the clamp.
EN
06
4. How to operate the clamp
IPPE10(E) lifting clamps are suitable for horizontal lifting and transport of non-sagging steel plates,
beams and structures. The IPPE10 clamps are kept in place after positioning by magnets.
See illustrations 3 - 5 for part reference.
1. Place the clamps on the plate and exercise pressure, so that the inner side of the jaw rests
against the plate (E) (3).
2. Tension the cables or chains with the crane hook, while the inner side of the jaw rests against
DO NOT attach
the plate (E) (4).
chains or cables
3. The load may now be lifted, paying careful heed to maintaining constant tension on the chains
on the handles!
and/or cables.
4. As soon as the load is at its destination let the crane hook descend until the clamp is fully free
of load, meaning that the lifting chain is no longer taut.
5. The clamp may now be removed from the load. A crowbar may be used placed between the
ridges of the body. This will allow the clamps to be simply turned away under the plate (5).
5. A reliable clamp, a secure basis for lifting
10 Year warranty preventive maintenance procedure:
Parts should be replaced only when they no longer meet our standards.
10 Year warranty repair procedure:
During every repair service the most critical parts, being camsegment will be replaced and, when
necessary, any rejected parts.
For clamps with a Working Load Limit (W.L.L.) of 4,5 ton or more, parts will be replaced only when
they no longer meet our standards.
Please consult www.thecrosbygroup.com/resources/crosbyip-10-year-guarantee for more infor-
mation on maintenance procedures.
Maintenance without 10 year warranty: Annually clamps are subjected to inspection* and parts will
be replaced only when they no longer meet our standards.
*CrosbyIP authorised repairer
Copyright © 2019 The Crosby Group LLC. All Rights Reserved.