Discharging Lithium Batteries; The Lixx Discharge Menu - Multiplex MULTIcharger LN-6015 EQU Instructions

10.3. Discharging Lithium batteries

LiPo DISCHARGE
D=0.10A
DEC
ENTER
DEC
LiPo DISCHARGE
D=1.00A
ENTER
DEC
LiPo DISCHARGE
D=1.00A
START
BALANCER CON.
NOT CONNECTED
BATTERY CHECK
WAIT PLEASE...
DCH 0:00 00000
LP-0.80A 11.925V
MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestraße 1 • D-75015 Bretten • www.multiplex-rc.de
MULTIcharger LN-6015 EQU Operating Instructions
INC
7.4Vp
INC
Pressing the ENTER button takes you to setting the discharge
current. Press the INC button to increase the value, and the DEC
7.4Vp
button to reduce it.
INC Press the ENTER button again to set the nominal voltage of your
Lithium battery. Press the INC button to increase this value, or the
DEC button to reduce it.
11.1Vp
BALANCER CON.
BATTERY CHECK
WAIT PLEASE...
DCH
LP-0.80A 11.925V
EQU
LP-0.80A 11.925V

the LiXX DISCHARGE menu

Press the DEC button to move to the LiPo EQUALIZE
menu; press the INC button to move to the Lithium type
menu.
CONNECTED
0:00 00000
0:00 00000
Hold the START button pressed in to
initiate the discharge process. Press
the STOP button to interrupt the
discharge process.
The MULTIcharger LN-6015 EQU
now checks whether you have
connected your Lithium battery's
balancer socket to the EQUALIZER
port, that the battery is properly
connected, and that all settings have
been entered correctly. If all is well,
the charger initiates the discharge
process. At the same time it
equalizes the Lithium battery,
provided that the battery's balancer
socket is connected to the
EQUALIZER port (right picture). If
not, it discharges the Lithium battery
without matching the individual cell
voltages.
Page 14/24