Selecting The Lithium Battery Type; The Nimh Program Group And The Nicd Program Group; Charging Nickel Batteries; The Lithium Type Menu - Multiplex MULTIcharger LN-6015 EQU Instructions

10.4. Selecting the Lithium battery type

Lithium type
LiPo
DEC
ENTER
DEC
Lithium type
LiPo
DEC
Lithium type
LiFe
DEC
Lithium type
LiIo

11. The NiMH program group and the NiCd program group

If you wish to charge Nickel batteries at a higher rate than normal (the "normal" current is
deemed to be 1/10 of the nominal battery capacity), you must ensure that the battery
consists of cells expressly stated to be fast charge capable.
Both program groups include the following functions/menus:
•

Charging Nickel batteries:

Final charge voltage NiXX: automatic, Delta-Peak method
o
Variable charge current
o
•
Discharging Nickel batteries:
Variable discharge current
o
Variable discharge voltage
o
•
Cycling (charging / discharging) Nickel batteries:
o Start by charging, end by discharging, or start by discharging, end by charging
o Variable cycle count: one to five cycles
o Variable charge current
o Variable discharge current
o The final discharge voltage is set in the NiXX DISCHARGE menu; the charger
automatically accepts this setting for discharging in the NiXX CYCLE menu.
MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestraße 1 • D-75015 Bretten • www.multiplex-rc.de
MULTIcharger LN-6015 EQU Operating Instructions
Press the DEC button to move to the LiXX DISCHARGE menu.
3.7V
INC
Press the ENTER button, and the currently set Lithium battery
3.7V type and the associated individual cell voltage will start to flash,
and you can move to the next Lithium battery type using the DEC
or INC button. Pressing the ENTER button again accepts the
selected battery type.
INC
3.3V
INC
3.6V

the Lithium type menu

Page 15/24