Handle Assembly - Power Fist 8967028 Manuel D'utilisateur

V4.0
DESCRIPTION
A. Handle with pre-installed rods and wires
B. Handle fastening screws
C. Handle fastening bolts
D. Spark plug removal key
E. Nuts and bolts
ASSEMBLY & INSTALLATION
FORWARD AND BRUSH CONTROL CABLE ASSEMBLY
IMPORTANT! The cables are already pre-assembled on the dashboard.
Couple the cable eyelet to the specific opening (Fig. 3).

HANDLE ASSEMBLY

IMPORTANT! The handle is already pre-
assembled on the dashboard.
The machine handle assembly screws, gear
control fastening screws, nuts and bolts
that are used to secure the brush directional
control are in a separate package.
1. Bring the two tubes at the ends of the
handle (Fig. 4A) up to the support (Fig.
4B).
Visit www.princessauto.com for more information
32 in. 3-in-1 Power Sweeper 8967028
QTY
1
4
4
1
1
7