Table des Matières
Publicité
V4.0
HEIGHT ADJUSTMENT OF CASTER WHEELS
AND BRUSHES
Once the brushes are worn, it is necessary to adjust
the height so that they are closer to the surface.
1.
Loosen the side knob (Fig. 10A)
2.
Rotate the upper knob (Fig. 10B) clockwise to lift
the small wheels and counterclockwise to lower.
3.
Tighten the side knob (Fig. 10A).
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3.
Repair or adjust the sweeper in a safe area, away from traffic and other
hazards.
4.
Before adjusting or servicing, remove spark plug wire from spark plug.
5.
Maintain the tool's labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
MAINTENANCE SCHEDULE
PROCEDURES
Hardware: inspect and tighten
Engine and air filter: check and clean if
necessary
Oil - check level
Unit - remove grease and debris
Visit www.princessauto.com for more information
32 in. 3-in-1 Power Sweeper
BEFORE
EACH USE
EACH USE
8967028
AFTER
13
Publicité
Table des Matières
