Table des Matières
Publicité
8967028
•
Lever forward: 15º to the right
•
Lever central: 0º no tilt
•
Lever rear: 15º to the left
SWEEPING
To sweep:
1.
Turn the brush directional
control (Fig. 9B) to the
required position. (See brush
direction)
2.
Set the gear depending on the
route and the amount of
material to be swept.
3.
Engage the brush drive. (Fig. 9C)
4.
Engage the traction drive. (Fig. 9D)
NOTICE! Avoid sweeper damage. Reduce travel speed to avoid hitting
immovable objects. The sweeper is equipped with an instant shutoff when
you release the levers, the brush and machine stop.
WARNING! During emergencies, release levers as quickly as possible and
stop the engine.
UNEVEN SURFACES AND HEAVY DEBRIS
•
Reduce speed to avoid wearing out the brush.
SNOW
•
Snow is easier to remove when it is still fresh.
•
Observe wind direction. Sweeping with the wind makes sweeping more
effective and helps keep debris off the operator.
DIRT AND GRAVEL
•
Use a low brush speed to reduce the amount of dirt lifted when sweeping.
If possible, sweep when the surface area is damp.
•
For gravel, adjust the height of the brush to avoid throwing them and
causing potential damages.
12
32 in. 3-in-1 Power Sweeper
For technical questions call 1-800-665-8685
V4.0
Publicité
Table des Matières
