Table des Matières
Publicité
V4.0
when operating the sweeper.
•
When sweeping on rough terrain, reduce speed to avoid excessive
bouncing. Loss of control can result in equipment damage and/or personal
injury.
•
Never sweep towards people, buildings, vehicles or other objects that can
be damaged by flying debris.
•
Only operate the controls while the engine is running.
•
When operating the sweeper in an open area, check for proper operation of
all controls and protective devices.
BEFORE EACH USE
•
Perform maintenance as indicated in Maintenance Schedule.
•
Run the sweeper at a low idle.
•
Check for proper brush rotation and drive engagement.
WARNING! Avoid serious injury. Check for large objects that could harm the
operator or others if thrown by the sweeper. Remove these items before
operating.
DURING USE
DIRECTING DEBRIS
•
Avoid excessive downward pressure on the brush sections to prevent
excessive wear. A two to four inch wide pattern is sufficient for most
applications.
•
Direct debris by angling the brush head in the desired direction.
•
Observe wind direction. Sweeping with the wind makes sweeping more
effective and helps keep debris off the operator.
BRUSH DIRECTION
The brush direction is regulated by a lever (Fig. 9B) that tilts it in the required
direction. Move the lever forward or rear in one of the 3 available positions to
tilt the brush.
Visit www.princessauto.com for more information
32 in. 3-in-1 Power Sweeper
8967028
11
Publicité
Table des Matières
