Aux In Operation - SOUNDMASTER SCD8000 Manuel D'instruction

PLAYING MP3s FROM USB MEMORY
1. Connect the USB memory stick to the USB port found on the front of the unit. The display will
show the total number of playable tracks on the USB device. Playback will start automatically
from Track 1.
2. To pause playback, press the PLAY/PAUSE/PAIR/SLECT button. The current track time will
flash on the display. To resume playback, press the PLAY/PAUSE/PAIR/SELECT button
again.
3. To stop playback, press the STOP/MENU button.
Repeat play (repeat 1- repeat album - repeat all)/program play/random play/intro play operation
is the same as described in "CD MODE" programming.
NOTICE:
To prevent harmful interference, always connect USB devices directly to the unit. Do not use

a USB extension cable to connect USB devices to the unit.
Unplug the unit, reconnect it again, playback will start from the last playing track.

AUX IN OPERATION

1. The unit will automatically switch to AUX mode when a 3.5mm AUX cable is connected to the
AUX input jack.
2. Insert the AUX line plug into the AUX IN jack (Φ3.5mm) on the player, music from the device
will be amplified and exported from the speakers.
3. Adjust the volume of the main unit to your desired level.
4. Press PLAY on the external audio source (e.g. MP3 player) to start playback.
5. Disconnect the cable to exit AUX mode.
MIC JACK OPERATION
Microphone input is available in all modes.
1. Connect your microphone to the 6.3mm MIC jack found on the front of the unit.
2. Rotate the M.VOL control knob on the unit to increase or decrease the microphone volume.
GUITAR JACK OPERATION
Guitar input is available in all modes.
1. Connect your guitar to the 6.3mm Guitar jack found on the front of the unit.
2. Rotate the G.VOL control knob on the unit to increase or decrease the microphone volume.
BLUETOOTH OPERATION
1. Press the FUNCTION button to select "BT MODE", the pair indicator light will flash.
2. Turn on the Bluetooth function on the device, scan the unit "SCD8000" and connect, then
input the password 0000 if required, the light will light up to indicate that the connection is
done, and the display will show "CONNECT". Press Play to start playback. If the unit can't
connect to the relative Bluetooth device within 2 minutes, the indicator light will flash every 2
seconds. Then press the PLAY/PAUSE/PAIR/SELECT button on the unit or the
PAIR/SELECT button on the remote control to reconnect.
9
M_SCD8000 / English Instruction Manual