SOUNDMASTER SCD8000 Manuel D'instruction page 22

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
M_SCD8000 / English Instruction Manual
the station list with a "?" in front of the station name.
Preset stations
To store a station in a preset memory, tune to the station that you want to save as a preset, then
press and hold the PROG./P-MODE/M. button on the unit or the MEMORY button on the remote
control until the display shows "Preset Store". Use the
or
button to choose a preset
memory position (for example, "Preset 1"), then press the PLAY/PAUSE/PAIR/SELECT button
to confirm. Repeat this operation to save up to 30 preset stations.
Manual tune
To do a manual tune, press the STOP/MENU button to enter menu selection, select the "Manual
tune" option and press the PLAY/PAUSE/PAIR/SELECT button to confirm. Use the
or
button to tune to the desired stations.
Now playing information
While a station is playing, the screen shows its name and DLS (Dynamic Label Segment)
information broadcast by the station such as program name, track title and contact details. To
view further information, press and hold the EQ/ID3/INFO button each time to show next set of
information, cycling through: DLS text, DL Plus information (this is only displayed if broadcast by
the station), signal strength, program type, ensemble name, channel number/frequency, signal
error rate and bit rate.
Dynamic range compression (DRC)
This function helps to reduce the difference between the loudest and quietest audio being
broadcast. Effectively, this makes quite sounds comparatively louder and loud sounds
comparatively quieter. There are 3 options in this setting, the options available are: DRC
high/low/off. To change the DRC setting, press the STOP/MENU button to enter menu selection,
select the "DRC" option then use the
or
button to choose a desired option and press the
PLAY/PAUSE/PAIR/SELECT button to confirm.
System
The system setting allows you to select display languages, reset to factory settings and view the
software version.
Language
To select different languages for display messages, press the STOP/MENU button to enter
menu selection, select the "System" option and press the PLAY/PAUSE/PAIR/SELECT button
to enter, select "Language" then press the
or
button to choose the desired language to
be displayed, then press the PLAY/PAUSE/PAIR/SELECT button to confirm.
Factory reset
Factory reset can help to clear all user defined settings, replacing them with the original default
values, including the DAB station list and preset stations. Press the STOP/MENU button to
enter menu selection, select the "System" option and press the PLAY/PAUSE/PAIR/SELECT
button to enter, select "Factory reset" then press the
or
button to choose YES or NO
option, then press the PLAY/PAUSE/PARI/SELECT button to confirm.
6

Publicité

Table des Matières
loading

Table des Matières