Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. Pick up the handset.
2. Press & release the STORE/MUTE (
3. Press the MEMORY (
) button followed by a numbered button from 0 to 9 to select memory
bank position.
4. Enter the desired phone number. You may enter (
just like the way you usually make calls to the desired phone number after you have picked up
the handset.
You may enter the PAUSE (
) into the dialling sequence to insert a timed delay when
necessary.
TO MAKE A CALL WITH THE TWO-TOUCH MEMORY BUTTON
To make a call with Two Touch Memory, simply pick up the handset and wait for dialling tone, press
the MEMORY (
) button followed by a corresponding numbered button. And, the stored phone
number sequence will be dialled.
Ringer Level and Melody
Your phone is built with 3 preset ringer melodies and loudness levels. To change the melodies and
loudness level, follow the instructions listed below:-
1. Pick up the handset.
2. Press and release the STORE/MUTE (
3. Press and release the (
) button.
4. Use the numbered button to make your selection of ringer melodies and loudness level combination.
Numbered Button
Ringer Melody
1
2
3
4
5
6 (factory setting)
7
8
9
0
5. Press and release the STORE/MUTE (
NOTE : When the ringer is in the OFF position, no ringing tone will be heard.
15
) button.
) or (
) button into the dialling sequence
/
) button.
Loudness Level
A
Low
A
Normal
A
High
B
Low
B
Normal
B
High
C
Low
C
Normal
C
High
OFF
OFF
/
) button.
Maintenance
1. Do not expose this product to dust, strong sunlight, humidity, high temperature, or mechanical
shock.
2. Do not use corrosive or abrasive cleansers on this product. Keep the unit dust free by wiping it
with a soft, dry cloth.
3. Do not disassemble this product, it contains no user-serviceable parts.
Trouble Shooting
Q1. My phone does not work!
A1. Make sure that all connection of coil cord and line cord are connected securely to the jacks.
A1. Push the hook switch once and wait for dialling tone again.
A1. If you have connected more than one phone to the same telephone line, make sure all other
telephones connected are put on hook. In some telephone systems, when the first phone on
the same telephone line are used, all other telephones are electrically disconnected.
A1. Try to connect another telephone to the telephone socket, if the problem persists, it appears
that there is a problem with your telephone line system, consult your network provider.
A1. If the person of the other end of the conversation does not hear your voice, make sure you
have not pressed the STORE/MUTE (
button once more and your phone should resume to normal operation.
Q2. My phone does not ring!
A2. Check if the ringer switch is on the OFF (
switch is on the OFF (
) position. Change the position of ringer switch to LOW (
(
).
A2. Make sure that the line cord is connected securely to the jacks.
Q3. The memory buttons do not work as expected!
A3. Make sure that you do not enter telephone number longer than limits mentioned in the memory
buttons section.
A3. If your phone is connected behind a PABX system, consult your system provider for information
of timed pause delay required to make an external call.
A3. If your phone has been disconnected over 15 minutes, it loses its memories. You have to
program all memory banks again.
) button. To test, press the STORE/MUTE (
) position. Your phone will not ring if the ringer
) or HIGH
EN
)
16
Publicité
Table des Matières
