Disposal Of The Device; Protection Of The Environment - Alfa Roll 7941 Mode D'emploi

Vacuum sealer bag loses vacuum after being sealed.
1.
Wrinkles, crumbs, grease or liquids may cause leaks along the seal. Reopen bag,
wipe the top inside of the bag and smooth it out along the sealing strip before
resealing.
2.
To check if there have moisture or juices from the food present within the bag, if yes,
you may need to cut open the bag and reseal it, or use an entirely new bag. Foods
with excess liquids should be frozen before vacuum sealing.
3. If items with sharp edges, they may have punctured the bag, and released the
vacuum. Cushion sharp edges in the contents of the bag with paper towels.
Vacuum sealer not sealing bag properly
If sealing strip over heat and melt the bag, it's necessary to lift the lid and allow
sealing strip to cool for a few minutes.
9.

DISPOSAL OF THE DEVICE

PROTECTION OF THE ENVIRONMENT

At the end of the life of your product, it should go to a specially adapted waste-recycling
centre.
EN 29