Presentation Of The Product - Stuv 16-H Instructions

This accessory has been designed
to offer you maximum comfort and
safety.

PRESENTATION OF THE PRODUCT

Dimensions
55
580 / 680 / 780
Recommendations
Read the installation instructions and
directions for use before installation
and actual usage.
This accessory (base) has been
designed for the Stûv 16-cube only.
The guarantee only covers damage
incurred during transport if it is
reported within 48 hours of delivery
and a complaint is made upon receipt.
The installation of the stove
compatible with this accessory,
surrounding materials must adhere to
instruction - installation base Stûv 16-H - 0710
20
It has been manufactured with the
greatest of care.
63
63
the installation document of the Stûv
16-cube, all regulations (local and
national) and all standards (national
and European).
The bases are compatible with the
16-cube from the following serial
numbers :
– 16/58-cube : from no.90817
– 16/68-cube : from no.95166
– 16/78-cube : from no.81637
If however you should find the
slightest dissatisfaction with it, please
contact your supplier.
456
100
This base has to be installed before
the installation of the stove itself.
Use the adjustable feet to install at the
right level.
Please note: it is preferable to
install the outside air inlet kit before
installing the stove. The stove has to
be dismantled if installation is carried
out the other way around.