FYTTER runner RU-6X Mode D'emploi page 18

STEP 1 – PASO 1 - ETAPE 1 - FASE 1 - STEP 1 – STAP 1:
1. Take out the main frame from the package box and put it onto the paperboard, and clear the fittings.
Use 2pcs M8*20 and 2pcs M8X55 screws and fix them onto the stand pipe with washers.
2.
STEP 2 – PASO 2 - ETAPE 2 - FASE 2 - STEP 2 – STAP 2:
Raise the computer panel while check the signal connection, and insert 2pcs M8×20 screws with washers to fasten it.
SUPPORT FRAME
FYTTER |WWW.FYTTER.COM PAG- 17