Operation; Fm Scan; Fm Reception - Imperial DABMAN d35 BT Mode D'emploi

7. OPERATION

7.1. FM scan

Press the Mode button on the device. The device will switch to FM
operation
E
Press the arrow key on the device for about 2 seconds to start a
scan. The radio will search for the next available station. Once the
radio has found an available station, the scan will stop automatically.

7.2. FM Reception

In FM mode, the IMPERIAL DABMAN d35 BT can receive analog
FM radio signals of the FM band (87.5 to 108 MHz) as well as RDS
signals when they are sent. To ensure the best possible reception,
extend the telescopic antenna to its maximum length before you turn
on the radio. Press the MODE button on the device in operation.
Playback will start with the last station that was selected. When
switching to FM mode for the first time, you will hear a noise, and the
received frequency (87.5 MHz) will appear on the display. To receive
the respective radio stations, you must first perform a scan.
Please also refer to section 7.1.
75 IMPERIAL DABMAN d35 BT