Usage Of Power Adapter; Button Functions - Gima CONTEC08A-VET Mode D'emploi

53

4.2 Usage of power adapter

1. Connect the sphygmomanometer and the power adapter. Insert the power adapter plug into the power adapter socket
on the right side of the device.
2. Please insert the power plug of the adapter into the AC 100 V~240 V socket.
Note
The device can be disconnected from the power supply network by unplugging the adapter plug.
When cut off the power supply, first cut off the connection of power socket and the regulated power supply, then
cut off the connection of regulated power supply and the sphygmomanometer.
Please be sure to use dedicated medical grade power adapter.
Note
When regulated power supply and batteries are both used at the same time, the battery power will not be con-
sumed.
Switch regulated power supply and battery as power supply when the device is off, otherwise, the device may
shutdown due to power failure.
The device can be used normally after it is turned on, without waiting for the device to be prepared.
Chapter 5

BUTTON FUNCTIONS

All the operations to the Electronic Sphygmomanometer are through the buttons. The names of the buttons are above
them. They are:
• [ON/OFF] ON/OFF button. Press this button to turn on/off the device.
• [START/STOP] Press it to inflate the cuff and start a blood pressure measurement. During measuring, press it
to cancel the measurement and deflate the cuff.
ENGLISH