Demand Of Editor; Installation Of The Software - Gima CONTEC08A-VET Mode D'emploi

67
ENGLISH
• Excessive animal movement.
• External light.
• Improper SpO probe installation or incorrect contact position of the patient.
2
• Temperature of SpO probe(optimal temperature range: 28°C ~ 40°C).
2
• Place the SpO probe on an limb that has a blood pressure cuff, arterial catheter, or intravascular line.
2
• Concentrations of dysfunctional hemoglobin, such as carboxyhemoglobin(COHb) and methemoglobin(MetHb).
• SpO is too low, Bad circular perfusion of the part being measured.
2
• Intravascular staining agents (such as indocyanine green or methylene blue), skin pigmentation.
• It is required to use SpO probe which is provided by our company, contact with our sale department when necessary.
2
Chapter 13

INSTALLATION OF THE SOFTWARE

13.1 Demand of Editor

Processor: Intel Celeron 2.5G or more
Operation System:Windows XP/Win7/Win8
EMS memory: 1GB and more
Hard Disk: 250G or more
Display: 17 inch or more
CD-ROM
USB: 2 or more
Resolution of printer: 600 DPI
13.2 Installation of Software
1. Place the CD-ROM in the CD-ROM compartment located on your computer.
2. If Auto Play for CDs is enabled, place CD in reader and follow instructions when they appear in the screen; otherwise
follow install instructions below: