Antari X-310PRO Mode D'emploi page 8

fog volume depend on the corresponding menu settings. Press the button TIMER , to activate
the timer mode. The display indicates the set time interval. The unit counts down to 0 seconds and
emits fog. To deactivate the timer mode, press the button TIMER again.
X-10PRO REMOTE CONTROL EXTERNAL VIEW
.
01 Thumb Screws
.
02 L.C.D Screen
.
03 Function Keypad
.
04 Cable For Remote
Control (2m/5-pin)
-Antari X-30PRO Control Module Operation
X-30PRO Wireless Control Module Operation
All the X-10PRO features plus wireless capability.
The wireless control module X-30PRO consists of a transmitter equipped with two buttons for fog
on and off, and a receiver pre-attached to the panel of each X-30PRO.
* Transmitter:
With the transmitter it is possible to emit fog via radio over a distance of up to 50 meters. The
transmitter is compatible to any receiver of the X-30PRO and can control an unlimited number of
machines in parallel.
8